C. Sherman Johnson Small Boat Rigging Kit

The C. Sherman Johnson Small Boat Rigging Kit groups common clevis, cotter, ring, and safety pins into one assortment for routine sailboat rigging service. It is useful for owners who want a selection of frequently needed retaining hardware on board instead of searching for individual pieces during setup or maintenance. The assortment covers several common clevis-pin diameters and grip lengths used around small-boat standing and running rigging. Keeping these parts together can also make pre-season inspection and replacement work more efficient.

The kit includes six 3/16 in clevis pins with a 17/32 in grip, six 1/4 in clevis pins with a 1/2 in grip, and four 5/16 in clevis pins with an 11/16 in grip. It also supplies ten 3/32 x 3/4 in Type 316 stainless cotter pins for securing compatible clevis pins and fittings. Ten circular pins with starters cover 3/16 in and 1/4 in applications, while six safety pins provide another reusable retaining option in those same common sizes. The variety makes the box useful as both a service assortment and a source of spares for the boat.

• Six 3/16 in clevis pins with 17/32 in grip
• Six 1/4 in clevis pins with 1/2 in grip
• Four 5/16 in clevis pins with 11/16 in grip
• Includes cotter pins, circular pins, and reusable safety pins

Use each replacement only where its diameter, grip length, and retaining method match the original rigging connection. Because these small parts often secure load-bearing fittings, worn or distorted pins should be replaced rather than reused. Browse more Sailing Hardware for compatible hardware and related marine rigging components.