Xantrex XPower 5000 12V GFCI Power Inverter

The Xantrex XPower 5000 is built for demanding 12V DC-to-AC installations aboard boats, work vehicles, and RVs. It supplies modified sine wave power for compatible appliances and tools where several AC connections may be needed. Despite the model name, the manufacturer installation guide specifies 4,000 watts of continuous output at 77°F and a 5,000-watt five-minute rating. That distinction matters when choosing an inverter for loads expected to run for extended periods.

Four GFCI AC receptacles, each protected by a 20A breaker, make this a more substantial installation than the smaller XPower models. The integrated digital display provides operating information at the inverter. High surge capacity helps with certain motor-driven loads, although startup requirements still need to be checked against the inverter ratings. Heavy DC connections require correctly sized cabling and suitable overcurrent protection.

• Four GFCI AC receptacles with individual 20A breakers
• Digital display for on-unit operating information
• 4,000W continuous output at 77°F per installation guide
• High surge capability for approved motor loads

Protection circuitry monitors conditions such as overload, excessive temperature, and battery voltage. Its modified sine wave waveform is not suitable for every electronic device, so confirm load compatibility before installation. For a high-current inverter of this size, the battery bank, wiring, ventilation, and operating duty cycle should be considered together. Browse more power inverters at CritPro.