Victron Lynx Power-In Class-T M10 Terminals

The Victron Lynx Power-In Class-T M10 brings up to two lithium battery strings into a Lynx system, taking 225A to 400A Class-T fuses.

Class-T fuses suit large lithium banks because of their high interrupting capability. A lithium bank can deliver enormous fault current, and an ordinary fuse may rupture without clearing the arc. Class-T breaks it properly, so it is specified for these installations rather than chosen for convenience.

The fuses are purchased separately and have to be sized for the installation. The module accepts 225A, 250A, 350A and 400A, and the correct rating follows the cable and the bank rather than the module's capability.

Two battery strings can be brought in, each with its own fuse position. That suits a bank built from parallel strings, where fusing each string separately contains a fault to the one that caused it. Explore more power distribution and bus bars.

• Class-T interrupts a lithium fault properly
• An ordinary fuse may rupture without clearing the arc
• Fuses sold separately: 225A to 400A
• Fusing each string contains a fault to that string