C. Sherman Johnson 1/8 in Interlocking Gate Eye

The C. Sherman Johnson 1/8 in Interlocking Gate Eye forms the hinge-side connection of a lifeline gate using 1/8 in wire. It is installed opposite the gate hook so the opening can swing while the lifeline remains connected to the stanchion hardware. The interlocking swivel arrangement allows movement at the gate instead of forcing the wire to twist each time the opening is used. That makes the fitting a purpose-built component for service or new construction of a conventional wire lifeline gate.

The gate eye should be selected to match the wire size and the geometry of the hook installed at the other end of the gate. Proper alignment helps the opening swing cleanly and reduces side load on the terminal as the hook is opened and closed. Because the fitting acts as the hinge point, its attachment and wire termination should be inspected whenever the gate hardware is serviced. Any wear that changes the eye shape or swivel action should be addressed before the lifeline is relied on again.

• Hinge-side fitting for a wire lifeline gate
• Interlocking swivel design allows gate movement
• Used opposite the gate hook
• Designed around 1/8 in lifeline wire

Install the eye so it can articulate through the full gate-opening range without contacting nearby stanchion hardware. Final gate tension should allow easy operation without leaving unnecessary slack in the surrounding lifeline. Browse more Sailing Hardware for compatible hardware and related marine rigging components.