C. Sherman Johnson 3/16 in Double-Thread Gate Eye

The C. Sherman Johnson 3/16 in Double-Thread Gate Eye provides a threaded end fitting for lifeline gates using 3/16 in wire. It is intended to thread into a compatible eye nut and form one end of the gate opening. The fitting is useful when replacing an existing Johnson-style threaded gate component or building a new gate with matching hardware. Its compact eye shape keeps the connection simple while allowing the gate system to be adjusted mechanically.

The mating thread should start freely by hand and engage fully without binding. Alignment with the opposite gate fitting is important because side load can make an otherwise correct gate difficult to open and close. After the eye is adjusted, the connection should be secured according to the surrounding lifeline hardware arrangement. Inspection should include the eye, threaded section, and the wire terminal attached to the gate.

• Threaded lifeline gate fitting for 3/16 in wire systems
• Pairs with a compatible eye nut
• Supports replacement or new gate installations
• Compact eye provides a direct end connection

Verify both thread compatibility and finished gate length before placing the lifeline under full tension. Replace the fitting if thread damage or eye deformation could prevent secure engagement with the mating hardware. Browse more Sailing Hardware for compatible hardware and related marine rigging components.