Viega MegaPress 316 FKM 1-1/2 in Slip Coupling

A slip coupling helps repair a stainless pipe run when there is little room to spread the cut ends apart. The Viega MegaPress 316 1-1/2 in version has no internal stop, allowing the coupling to slide along the pipe during positioning. This distinguishes it from the standard coupling fitted with a center stop.

The fitting is made from 316 stainless steel and uses FKM sealing elements at its press connections. Grip rings and separator rings are included in the assembly. It is designed for suitable Schedule 5 through Schedule 40 stainless steel pipe. That sliding movement is important when a repair section cannot easily be spread apart.

The absence of a stop means the installer must establish the correct alignment and insertion position. Mark and measure the pipe before making the press joints. Use the correct Viega tool setup and verify the service conditions for the completed stainless piping system. Browse more marine pipe fittings at CritPro.

• 1-1/2 in stop-free slip coupling
• Designed for stainless pipe repairs
• 316 stainless steel and FKM seals
• Press connections at both ends