Veratron VMH-35D Diesel Multifunction Gauge 85mm

The Veratron VMH-35D is a standalone diesel engine monitor built to condense engine, battery, tank, and GPS data into a single compact 85mm display, with a configurable dial scale of either 3000 or 4000 RPM to match the engine it's paired with.

This gauge pulls specific diesel engine alarms either directly off the SAE J1939 bus or from locally configured thresholds set through its embedded menu, and it supports both 12V and 24V systems out of the box. EasyLink connectivity lets the dashboard expand with additional VMH 14 satellite displays as needed, and the embedded high-performance GPS receiver adds speed, position, and heading data on top of engine readings, so a boater gets navigation info without a separate device.

A mineral glass front is optically bonded to the sun-readable hybrid display for clear visibility in direct light, and a brushed stainless steel bezel gives it a look that fits both classic and modern helm designs. The embedded NMEA 2000 gateway distributes fuel, trim, and tachometer data to other devices like chartplotters without needing an external converter, and despite its speed, the VMH-35D draws just 170mA at full brightness. IPX7 protection keeps it sealed against spray. Browse more marine instruments and gauges at CritPro.

Key Features: diameter: 85mm (3-3/8 inch), dial scale: 3000 or 4000 RPM Configurable, bezel: Brushed Stainless Steel, gps: Embedded High-Performance, protection rating: IPX7, nmea 2000: Yes, Embedded Gateway, j1939: Yes, easylink outputs: Up to 16 VMH 14 Satellites, voltage: 12/24V, includes: Gauge, Mounting Spinlock, Wire Harness, Safety Instructions.

Frequently Asked Questions

What size is this gauge? 85mm (3-3/8 inch).

What is the waterproof rating? IPX7.

What voltage does it run on? 12/24V.