Veratron VMH Flex Multifunction Gauge 52mm NMEA2000

The Veratron VMH Flex is a 52 mm multifunction gauge that shows a lot of boat data in a small space. A laser touch button scrolls through up to 5 screens, and it works with gloves on or in the rain. Each screen can be set up in a single or dual layout with your most important readings.

Available functions include rudder, trim, speed, RPM, engine hours, fuel, fresh and waste water levels, coolant and oil temperature, oil and transmission pressure, boost, depth, clock, compass and battery. Setup and alarms are done with a smartphone tap over NFC. The 1.44 inch color TFT display is readable in sunlight. The display resolution is 125 x 125 pixels, and it connects through a Tyco/Hirschmann MQS 8-pin plug and a Micro-C M12 5-pin connector.

It has NMEA 2000 connectivity, two analog inputs (one resistive, one frequency), a built-in analog to NMEA 2000 converter and a LIN port for an Intelligent Battery Sensor. It runs on 9 to 32 volts, is rated IPX7 and fits a 52 mm hole. Check system voltage and sender compatibility before final wiring, especially when replacing an older gauge with a similar face size. Browse more marine gauges.

• Up to 5 customizable screens
• Laser touch button works with gloves
• NMEA 2000 with built-in analog converter
• Sunlight-readable color display
• Up to 5 scrollable screens in single or dual layout