Fast shipping from Georgia
The SmartPlug Inlet and Female Cord Connector Combo is a 30A 125V conversion kit in gray, holding a male boat inlet and a matching female cord-end connector.
This kit converts the boat side while keeping an existing shore cord, which is the sensible order to do the work in. The cord is usually the most expensive part and often the part in best condition. Gray is the alternative to white, suiting a hull or transom panel where a white fitting would stand out against darker gelcoat.
SmartPlug increases the pin and clip contact area considerably over a twist connector, which improves conductivity under sustained load and reduces the heat that builds at worn or high-resistance connections. Heat at a shore connection is what starts fires on boats, and contact area is the thing that addresses it.
The keyed body pushes straight in without twisting and only goes one way, which makes connecting easier in the dark or in a cramped transom locker. Side clips and the inlet cover form a multi-point lock, and silicone gaskets in both keep moisture away from the connection. Explore more shore power kits.
The SmartPlug Inlet and Female Cord Connector Combo is a 30A 125V conversion kit in gray, holding a male boat inlet and a matching female cord-end connector.
This kit converts the boat side while keeping an existing shore cord, which is the sensible order to do the work in. The cord is usually the most expensive part and often the part in best condition. Gray is the alternative to white, suiting a hull or transom panel where a white fitting would stand out against darker gelcoat.
SmartPlug increases the pin and clip contact area considerably over a twist connector, which improves conductivity under sustained load and reduces the heat that builds at worn or high-resistance connections. Heat at a shore connection is what starts fires on boats, and contact area is the thing that addresses it.
The keyed body pushes straight in without twisting and only goes one way, which makes connecting easier in the dark or in a cramped transom locker. Side clips and the inlet cover form a multi-point lock, and silicone gaskets in both keep moisture away from the connection. Explore more shore power kits.
Be the first to write a review.
