Blue Sea 8664 Contura 2 Bilge Pump Control Panel

The Blue Sea Systems 8664 Contura 2 Bilge Pump Control Panel gives On, Off and Auto control for two bilge pumps on 12V or 24V systems.

Two pumps is the common arrangement on a boat with a main bilge and a forward or engine room zone, against the four-pump 8666 for larger vessels. Each circuit uses a Contura rocker with its own AGC/MDL glass-fuse holder, so a fault in one pump circuit leaves the other working.

The embedded On LED indicates when the pump is running whether it was started manually or by the float switch. That means automatic activity is visible from the panel rather than happening unseen, and a pump running more often than usual becomes noticeable.

A watertight mounting gasket improves resistance to marine exposure, and the panel arrives completely wired and ready to install. Building two separate pump control circuits from components would take considerably longer and end up less tidy. Explore more marine switch panels.

• Two pumps, against four on the 8666
• Separate fuses so one fault leaves the other working
• LED lights on manual or automatic operation
• Arrives completely wired