Xantrex DC Battery Cables Fuse XL-Kit, 4-Gauge

The Xantrex DC Battery Cable and Fuse XL-Kit has pre-terminated 4-gauge cables around 8 feet long with a fuse, for 2400W to 3000W inverters.

Pre-terminated cables remove the crimping and the tooling from the installation entirely. Making a proper 4 AWG termination needs a hydraulic crimper and adhesive-lined heat shrink, and a poor hand crimp is a joint that heats under load rather than an obvious failure.

Eight feet is the reach between the battery bank and the inverter, and the run has to fit within it. Measuring the actual path including bends before ordering matters, since a kit that is six inches short cannot be extended without adding the joint the kit exists to avoid.

The fuse is included rather than sold separately, which completes the protection at the battery end. This XL version suits inverters in the 2400W to 3000W range, and matching the kit to the inverter is what makes the cable and fuse ratings correct. Explore more battery charging accessories.

• Pre-terminated: no crimper or tooling needed
• A poor 4 AWG crimp heats rather than failing openly
• 8 feet of reach: measure the actual path first
• Fuse included, matched to a 2400-3000W inverter