Wichard Profurl C260 Headsail Reefing and Furling System

The Wichard Profurl C260 Headsail Reefing-Furling System is a headsail furling arrangement for sailboats approximately 5 to 7 meters long. It carries its own halyard rather than relying on a conventional halyard led down the mast. That configuration can be useful on smaller boats where mast compression and forestay tension affect sail shape.

The halyard leads over a sheave at the top of the extrusion and returns to a sheave and cam cleat below. Once the sail is raised and tensioned, the remaining halyard serves as the furling line. Installation is based on the lower swage terminal of the forestay, with no special stem-head attachment required in the manufacturer description. The system can be separated into two sections for trailer transport or storage.

This model is intended for smaller sailboats, including fractional rigs where forestay sag can be difficult to control. Confirm the forestay terminal, boat length, and sail arrangement before choosing the C260. Its integrated halyard path differs from conventional headsail furlers, so the installation should follow the Profurl instructions. Browse more sailing hardware for related deck and rigging equipment.

• Integrated halyard and furling-line arrangement
• Fits an existing forestay with the specified terminal
• Two-section separation for trailer transport
• Top sheave, lower sheave, and cam-cleat halyard route