Wichard 85mm Chain Grip for 8mm Anchor Chain

The Wichard Chain Grip For 8mm Chain 85mm for Marine Rigging attaches to anchor chain so the anchor rode can be supported by a separate line. It is intended to relieve tension on the windlass when a vessel lies at anchor. This grip is sized for 8 mm anchor chain. Its shape follows the chain-link connection rather than a general-purpose deck hook.

The chain grip transfers the load to the chosen snubber or anchoring connection when rigged correctly. Reducing direct load on the windlass helps keep the windlass from carrying the full anchoring force. The chain size must match the grip, since a similar-looking chain of another diameter is not interchangeable. The line or other support equipment must be appropriate for the vessel’s anchoring system.

Wichard lists a marine working load of 1,050 lb. The published breaking load is 1,960 lb. Check the product geometry against the chain profile and the surrounding bow fittings. Use the grip within the manufacturer’s anchoring guidance rather than as a lifting device. Browse more sailing hardware for related deck and rigging equipment.

• Chain-specific grip for anchor rode tension relief
• Connects the chain to a separate snubber or support
• Helps keep direct anchoring loads off the windlass
• Matched to an identified chain diameter