Whitecap 7/8 x 4 x 36 in Marine Teak Lumber

Whitecap's marine teak lumber provides a straight piece of wood for repair or custom fabrication. It is suitable for a project where a ready-sized board is more convenient than cutting down larger stock. The natural teak can be worked and finished to suit surrounding woodwork.

The board is 7/8 in thick, 4 in wide, and 36 in long. Measure the required finished piece against those starting dimensions, including any material removed by cutting or shaping. Grain direction and the final surface treatment should be considered before installation.

Use the stock for appropriately sized trim, joinery, or replacement pieces. It is raw lumber rather than a finished assembled fitting. Confirm the structural requirements of the intended project separately from the board dimensions. Take account of saw kerf and final finishing when cutting the board to length. Explore more mounting and rigging hardware at CritPro.

• 7/8 in thick teak stock
• 36 in length
• For custom marine woodwork