Whitecap 304 SS Rod and Cup Holder, 30-Degree

The Whitecap 304 Stainless Steel Rod and Cup Holder in the 30-degree configuration combines a flush-mounted rod tube with a cup-holder opening in one fitting. The threaded body is secured with an included locking nut, eliminating the need for a separate backing plate. An open bottom with a threaded insert allows a pipe or hose barb to be installed for drainage, and a pin is included for locking a rod in place.

The cup-holder opening measures 4-3/4 in outside diameter with a 2-1/2 in depth and requires a 4 in cutout. This 30-degree version uses the same threaded-body, drain-ready, locking-pin design as the other angle options while setting the rod tube at 30 degrees. For trolling or storage, the most useful comparison points are material, mounting style, tube diameter, angle, and how easily the rod can be removed.

This model is best selected around the boat's existing mounting surface and the rod setup it needs to support. Before installation, compare the listed tube, rail, or mounting dimensions with the boat hardware where the holder will be used. Browse more rod holders.

• Threaded body installs with an included locking nut and does not require a backing plate
• Open bottom accepts a threaded pipe or hose-barb connection for drainage
• Locking pin is included for securing a rod in the holder
• 4-3/4 in outside diameter, 2-1/2 in depth, and 4 in cutout
• Rod tube is set at 30 degrees