Whitecap 304 SS Rod and Cup Holder, 0-Degree

The Whitecap 304 Stainless Steel Rod and Cup Holder with a 0-degree rod tube is the straight configuration in this pair. It combines a flush-mounted beverage opening with a vertical rod-holder tube for installations where an angled presentation is not required.

A threaded mounting body passes through the cutout and is secured with the included locking nut, eliminating the need for a separate backing plate. The open bottom has a threaded insert for adding a drainage pipe or hose barb, and Whitecap includes a pin for locking a rod in place.

The cup-holder section is 4-3/4 in outside diameter and 2-1/2 in deep with a 4 in cutout requirement. Check the space below the mounting surface for the straight rod tube and any drain fitting before installation.

• Straight rod tube works where a vertical mounting angle is preferred
• Locking-nut installation avoids separate backing-plate hardware
• Open bottom supports a plumbed drainage connection
• Rod-retaining pin is included with the fitting

Browse more rod holders.