Trident LPG Regulator w/300 PSI Gauge and Pigtail

The Trident LPG regulator assembly combines a single-stage, single-port regulator with a 300 PSI pressure gauge, wall-mount brackets, and a 20-inch POL pigtail hose. The remote-mounted configuration is intended for marine LPG systems where moving the regulator to the locker wall can improve organization and preserve working room around the cylinder.

Its die-cast zinc body uses a 3/8-inch female pipe-thread outlet, while the included pressure gauge gives a convenient point for checking system pressure and supporting leak-test procedures. The supplied POL pigtail connects the cylinder to the regulator, reducing the number of separate components that must be sourced for the basic regulator installation.

The assembly is UL Listed and should be installed as part of a properly designed marine LPG system using approved fittings, hose, ventilation, shutoff components, and leak-testing procedures. Secure the regulator and pigtail so neither is subjected to damaging strain, and follow applicable marine LPG standards before placing connected appliances into service.

• The regulator, pressure gauge, wall brackets, and 20-inch POL pigtail are supplied together for a more complete installation.
• Remote wall mounting moves the regulator away from the cylinder area and can simplify locker organization.
• The integrated 300 PSI gauge gives the installer a convenient reference during system testing.
• The listed construction is intended for properly designed LPG installations using compatible marine components.

Worth comparing against our other fuel system components.