Rule 800 GPH Electronic Sensing 12V Bilge Pump

The Rule 800 GPH Electronic Sensing 12V Bilge Pump gives automatic bilge-water removal using electronic sensing instead of a separate mechanical float switch. The pump briefly cycles at regular intervals and monitors impeller resistance; when water is detected, it continues running until the bilge is cleared and then returns to its monitoring cycle.

This sensing approach keeps the automatic control inside the pump package and eliminates an external float arm that can be obstructed by loose debris. Submersible construction, marine-oriented wiring, and Rule's compact pump design make the unit appropriate for compatible bilge installations where automatic operation and straightforward service are priorities.

Confirm the boat's electrical system, circuit protection, discharge-hose routing, mounting position, and access for cleaning before installation. Keep the intake free of debris, secure wiring above normal bilge water where practical, and test several sensing cycles with water present before relying on unattended operation. See other bilge water pumps when planning primary and backup capacity. Explore our full range of bilge and water pumps.

• Impeller-resistance sensing gives automatic control inside the pump assembly.
• The control system resumes periodic checks after detected water is removed.
• Electronic sensing avoids a conventional external float mechanism.
• Pump and automatic control occupy one integrated package.