Jabsco 115V Utility Pump with Open Drip Proof Motor

The Jabsco 115V Utility Pump is a portable bronze pump with a 3/4 HP open drip proof motor, built for dewatering and transfer jobs on the dock, in the yard, or aboard. It moves 23 GPM at 10 feet of total head through 1-inch NPT ports. The capacitor motor is rated for continuous duty with thermal overload protection, and it comes wired for 115V but can be converted to 230V.

Inside are a nitrile impeller, a 316 stainless impeller sleeve, a replaceable wearplate, and a lip-type shaft seal, so the pump can be rebuilt rather than replaced. Bronze resists corrosion in salt water, which keeps the pump head in service for years. It works well for pumping out a flooded bilge on the trailer, draining a livewell or tank, or general water transfer around the dock or shop. At about 35.5 pounds, with a carrying handle and an 8-foot grounded power cord, it is easy to move where it is needed.

An open drip proof motor is meant for sheltered locations, so keep it out of rain and spray while it runs. Prime the pump before first use and do not let it run dry for long periods. Take a look through our bilge and water pumps for permanently mounted options.

• 3/4 HP open drip proof motor
• 23 GPM at 10 feet of head
• 115V, convertible to 230V
• Bronze head with 1-inch NPT ports