Jabsco 12V Replacement Motor for 37010 Toilets

The Jabsco 12V Replacement Motor for 37010 Toilets (part 37064-0000) fits 12V 37010 series electric marine toilets. In those toilets, one motor drives both the rinse pump and the macerator, so a failing motor affects the whole flush. A slow, weak, or silent toilet is often the first sign.

Before replacing the motor, check for low voltage at the toilet, a tripped breaker, or a blocked macerator, any of which can look like a motor problem. Low voltage from undersized wire can make a good motor run slowly. If the motor turns freely but water does not move, the pump parts may be the issue instead.

Disconnect power before removing the old motor and follow Jabsco's service instructions. Inspect the shaft seals on the pump housings while the motor is off, since a leaking seal can ruin a new motor. Run several flushes after installation and check that both rinse and discharge work. Find more 37010 parts in our toilet parts and accessories.

• 12V motor for 37010 toilets
• Part 37064-0000
• Drives rinse and macerator pumps
• Rebuild instead of replace