Hella ValueFit Mini 6-LED White Flood Light Bar

The Hella ValueFit Mini light bar is a compact work light for areas that need useful deck or equipment illumination without a full-size light bar. Six high-intensity LEDs produce a measured output of roughly 800 lumens, giving the fixture enough light for close-range tasks around boats, trailers, and utility equipment. The broad pattern spreads that output across a wider work area instead of concentrating it into a narrow long-distance beam. Its short housing is easy to place on small brackets, transoms, towers, or equipment frames where space is limited.

The housing is die-cast aluminum for durability and heat management, and the supplied stainless bracket lets the installer aim the fixture after mounting. That adjustable bracket is useful when the final working angle cannot be determined until the boat or equipment is in its normal operating position. The compact bar can be used as a utility light, backup-area light, or supplemental deck light depending on the installation. Its simple two-wire setup also makes it practical for retrofit projects that do not need multi-color controls or complex electronics.

The fixture measures approximately 6.3 in wide by 1.8 in high by 2.5 in deep, so rear and side clearance are easy to plan before drilling. The metal bracket should be fastened to a rigid surface that can hold the aiming angle through vibration and repeated impacts. Final beam adjustment should light the work area without reflecting directly from bright rails, glass, or painted surfaces. That careful positioning makes the modest-size fixture more useful than simply mounting it wherever space is available.

• Six high-intensity LEDs provide compact utility lighting
• Measured output is approximately 800 lumens
• Die-cast aluminum housing supports durability and heat control
• Adjustable stainless bracket allows final beam aiming

Use suitable circuit protection and route the wiring so vibration or bracket movement cannot pull on the electrical connection. A clean installation also makes future inspection and service easier because the connections remain accessible and organized. For related products and compatible marine hardware, browse more LED Light Bars & Pods.