Barton Marine BPG-50 50mm Bulkhead Pipe Gland

The Barton Marine BPG-50 50mm Bulkhead Pipe Gland seals a pipe or tube where it passes through a bulkhead while still allowing the penetration to remain serviceable. The flexible sealing arrangement accommodates pipe entry at an angle and can conform to curved mounting surfaces. Its stainless steel and nitrile-rubber construction is intended to create a water- and vapor-tight barrier around the opening. The gland can be adjusted or serviced in place, which is useful where removing the pipe later would be impractical.

The Barton Bulkhead Pipe Gland BPG-50 is for pipes with an outer diameter between 45-50mm (13/4 - 2″). The required hole cutter is 60mm. It has 4 M6 fasteners supplied. These glands give a water and vapor-proof seal between bulkheads. They are easy to fit and fully serviceable in situ.

• Vapor and watertight construction
• Seals the aperture for pipe and tube integration
• Compatible with angled pipes and curved surfaces
• Sealed but fully serviceable and adjustable
• Suitable for bulkheads up to 35mm thick

For the BPG-50 50mm Bulkhead Pipe Gland, bPG-50 is intended for a defined pipe outside-diameter range and requires a properly sized bulkhead opening for the seal to work correctly. Its supplied fasteners clamp the flexible gland securely while still allowing later adjustment or service without removing the entire pipe run. For additional sealed pass-through hardware, browse more Cable Seals & Glands.