Barton Marine Low-Friction Stanchion Bullseye

The Barton Marine Low-Friction Stanchion Bullseye guides a furling line aft along the stanchions without adding a moving sheave. The hard-anodized eye gives the line a smooth, low-friction bearing surface and resists abrasion during repeated furling cycles. A strap-style attachment secures the fitting at the stanchion base without requiring new holes in the deck. The lightweight design suits both cruising and racing boats that want a clean furling-line lead with minimal maintenance.

Stanchion Bullseye which fits the base of stanchions for smooth control of furling lines. The contemporary sleek design features a Dyneema-effect securing strap over the metal retaining rod, through-bolted onto a fully enclosed backing plate for a clean finish. Ideal for racers and cruisers alike. The Stanchion Bullseye has no moving parts so weight is kept to a minimum and no new holes are required in the deck. The superior, super smooth, hard-anodized finish on the high load eye provides low friction and excellent support for slick running lines, and excellent abrasion resistance for long-term service life.

• Stanchions up to 1" to 1.25" (25 to 31.75 mm) wide
• Maximum Rope Diameter: 3/8" (9.56 mm)
• Dimensions (L x H x W): 3.2" x 2.1" x 2.1" (79 x 55 x 55mm)
• No moving sheave means very little mechanical maintenance

For the Low-Friction Stanchion Bullseye, fit the bullseye at a suitable stanchion base and keep the furling line running through the eye without a sharp bend. Because there are no moving parts, routine care is largely limited to keeping the eye and line clean and checking the attachment strap. For related marine hardware, browse more Sailing Hardware.