Whitecap 6 in 316 Stainless Pull-Up Boat Cleat

A Whitecap 6 in pull-up cleat gives boat owners a raised tie-off point only when it is needed. The 316 stainless steel fitting uses a drill-and-drop installation approach. Whitecap notes that fitting the locking nuts does not require extra-long sockets.

Its overall dimensions are 6-3/4 in long and 1-1/4 in wide. The cleat measures 6 in, while the stud length is 1-7/8 in. The listed maximum rope diameter is 7/8 in, which should be considered when pairing it with existing lines. A 3/4 in barb size is also specified for the mounting arrangement.

Check the mounting surface and below-deck clearance before committing to the hole location. Pull-up fittings have different installation requirements from conventional surface-mounted cleats. The compact working profile can be useful where deck traffic passes near the tie-off point. Explore more mounting and rigging hardware at CritPro.

• Drill-and-drop installation arrangement
• 1-7/8 in stud length
• 7/8 in maximum stated rope diameter