Viega MegaPress 316 2x1.5-Inch FKM Stainless Reducer

The Viega MegaPress 316 Reducer steps 2 inch pipe down to 1-1/2 inch, in 316 stainless with FKM sealing elements.

Two inch down to one and a half is a large step, and it usually marks the point where a main trunk line branches into distribution. Getting that transition right matters for flow, since an abrupt reduction creates turbulence and pressure loss. A press reducer makes that joint without heat, which on a boat is the whole argument. No welding means no hot work permit, no fire watch and no dismantling to get a torch in.

The fitting works with Schedule 5 through Schedule 40 stainless pipe, covering both thin-wall and standard-wall systems from one part. Grip rings bite into the pipe to hold it mechanically while the FKM element does the sealing, so the joint handles load and pressure through separate components. Explore more marine pipe and fittings.

• Steps 2 inch pipe down to 1-1/2 inch
• Pressed cold, with no hot work aboard
• Fits Schedule 5 through Schedule 40 pipe
• Grip rings hold, FKM element seals