Victron 5-Pack of 200A 80V Ceramic MEGA Fuses

A 200 A Victron MEGA fuse covers larger feeds, such as an inverter or inverter/charger branch on a 12 V or 24 V bank. At 12 V that rating is about 2,400 W, at 24 V about 4,800 W, and at 48 V about 9,600 W. With five in the pack, you can fuse several matching circuits and still have a spare.

The 80 V DC rating covers 12, 24 and 48 V systems. The fuses bolt into Victron's Lynx Distributor and the five-position MEGA fuse holder bus bar, so every branch leaving the battery is protected in one place. The bolted connection keeps resistance low at high current, which cuts heat at the terminals.

Clean the contact faces and torque the holder nuts to spec when fitting a new fuse, since a loose terminal at 200 A will run hot. If a 200 A fuse keeps blowing, look for a short or an overloaded circuit instead of fitting a bigger fuse. Our bus bars and power distribution section has the Lynx modules and holders that take these fuses.

• Five 200 A fuses for larger inverter and charger branches
• About 2,400 W at 12 V, 4,800 W at 24 V, 9,600 W at 48 V
• Low-resistance bolted terminals reduce heat at high current