Trident 1/2-Inch Red 50-Foot Hot Water Feed Hose

A red translucent cover makes the Trident 1/2-inch hot-water feed hose easy to distinguish from the cold-water plumbing beside it. The FDA-grade inner tube is intended for drinking-water use and is described as non-toxic, odorless, and tasteless. It is supplied in a 50-foot boxed length for connecting compatible marine water heaters and fixtures. Three-ply polyester reinforcement provides strength without turning the hose into a rigid pipe.

This size is rated for a maximum working pressure of 250 psi, with a stated temperature range of -18°F to 149°F. The 0.98-inch minimum bend radius helps with close routing, while an outside diameter of approximately 0.777 inch is useful for planning supports and pass-through openings. The reinforced PVC cover handles routine contact and abrasion better than thin unreinforced tubing. Use the temperature rating rather than the red color alone when deciding whether it suits a particular hot-water circuit.

When installing paired hot and cold lines, the color difference makes later inspection and service less confusing. Choose fittings intended for the actual hose inside diameter and leave enough slack for normal movement aboard the boat. Explore our marine water and bilge hose selection for other marine water-line sizes.

• Red translucent jacket identifies hot-water circuits
• Drinking-water-safe FDA-grade inner tube
• Polyester reinforcement supports pressure service
• Flexible construction is convenient for confined plumbing runs