SmartPlug 30 Amp Dual 25' Shore Power Cordset
- UPC:
- 682500441158
- MPN:
- CM30253
- Condition:
- New
- Availability:
- In Stock
- Shipping:
- $5.95 Flat Rate (Per Order)
Fast shipping from Georgia
Description
The SmartPlug Dual SmartPlug Cordset is 25 feet of 30A 125V cable with SmartPlug connectors at both the vessel and the pedestal.
Twenty-five feet is the short dual cordset, for a berth where the pedestal sits close. Buying only the reach the slip needs leaves less cable to coil, stow and step over. It also requires that the marina has SmartPlug pedestals, which most do not. A dual SmartPlug cord will not connect to a conventional twist-lock pedestal at all, so check the berth first.
Where both ends match, the locking and sealing design applies at the dock as well as the boat, and the dock end takes the weather and foot traffic. Side clips hold each connector body so cable movement does not stress the current-carrying contacts, and silicone gaskets seal the plugs once properly engaged.
Tinned marine wire runs through the cord to limit the corrosion that damp and salt air cause inside a cable. Red and blue LED indicators on the female connector check power condition and identify reverse polarity before the connection is relied on. Explore more shore power cordsets and cables.
- 25 feet, the short dual SmartPlug cordset
- Needs a SmartPlug pedestal, which most marinas lack
- Will not connect to a conventional twist-lock
- Tinned wire with reverse-polarity LEDs
Specifications
- Amperage:
- 30A
- Connection Type:
- SmartPlug to SmartPlug
- Length:
- 25 ft
- Product Type:
- Shore Power Cordset
- Voltage:
- 125V
Description
The SmartPlug Dual SmartPlug Cordset is 25 feet of 30A 125V cable with SmartPlug connectors at both the vessel and the pedestal.
Twenty-five feet is the short dual cordset, for a berth where the pedestal sits close. Buying only the reach the slip needs leaves less cable to coil, stow and step over. It also requires that the marina has SmartPlug pedestals, which most do not. A dual SmartPlug cord will not connect to a conventional twist-lock pedestal at all, so check the berth first.
Where both ends match, the locking and sealing design applies at the dock as well as the boat, and the dock end takes the weather and foot traffic. Side clips hold each connector body so cable movement does not stress the current-carrying contacts, and silicone gaskets seal the plugs once properly engaged.
Tinned marine wire runs through the cord to limit the corrosion that damp and salt air cause inside a cable. Red and blue LED indicators on the female connector check power condition and identify reverse polarity before the connection is relied on. Explore more shore power cordsets and cables.
- 25 feet, the short dual SmartPlug cordset
- Needs a SmartPlug pedestal, which most marinas lack
- Will not connect to a conventional twist-lock
- Tinned wire with reverse-polarity LEDs
Specifications
- Amperage:
- 30A
- Connection Type:
- SmartPlug to SmartPlug
- Length:
- 25 ft
- Product Type:
- Shore Power Cordset
- Voltage:
- 125V
Specifications
Amperage, Connection Type, Length, Product Type, Voltage,
Specifications
- Amperage:
- 30A
- Connection Type:
- SmartPlug to SmartPlug
- Length:
- 25 ft
- Product Type:
- Shore Power Cordset
- Voltage:
- 125V
Our customers love it
Review this ProductBe the first to write a review.