Rule-Mate 2000 GPH Fully Automated 12V Bilge Pump

The Rule Rule-Mate 2000 GPH Fully Automated Bilge Pump (12V) consists of a powerful Rule bilge pump and a highly intelligent circuit board built into a single housing. It is designed for boaters who want an all-in-one pump and switch that activates automatically as water rises and shuts off cleanly once it's cleared.

The pump activates when water reaches 2-1/2 inches and automatically shuts off when it senses no water against the impeller, reducing remaining water to approximately 5/8 inch. Built-in Rule-Mate Intelligence senses when the pump is running but not pumping water, stopping the pump and checking for water every 2-1/2 minutes if debris fouls the sensor or the pump becomes air-bound, protecting both the pump and the vessel's batteries. Browse more options in our bilge and water pumps category.

Key Features: 2000 GPH at 0 ft, 12V, all-in-one pump and switch, 1" NPS discharge with 1" and 1-1/8" screw-on ports, extra long life heavy duty motor, Rule-Mate Intelligence self-diagnostic protection, 3-year warranty.

Frequently Asked Questions

What does Rule-Mate Intelligence do? It senses when the pump is running but not pumping water, stopping and checking every 2-1/2 minutes if debris fouls the sensor, protecting the pump and the vessel's batteries.

At what water level does this pump activate? 2-1/2 inches, shutting off automatically at approximately 5/8 inch.

Does this pump require a separate float switch? No, it's an all-in-one pump and switch in a single housing.