Megaware SkegGuard 27281 for Evinrude E-TEC G2

The Megaware SkegGuard 27281 is a stainless-steel skeg protector and repair solution designed for Evinrude E-TEC G2. It can help prevent damage to an intact skeg or cover and reinforce a damaged skeg, giving boat owners an alternative to more involved lower-unit skeg repair when the application matches the model guide.

Marine-grade 316 stainless steel gives corrosion resistance, while a reinforced 3 mm lower wear plate adds material where ramp dragging, rocks, and submerged debris are most likely to strike. The guard conforms closely to the lower unit to limit performance impact, and a drain hole helps prevent trapped water from remaining inside the installed protector.

Self-locking hardware supports a do-it-yourself installation with common tools, and the source states that installation can take less than ten minutes. For damaged skegs, the guard can be fitted with as little as roughly 2 to 3 inches of original skeg remaining. Confirm the exact engine, gearcase, horsepower, and model-year fitment before drilling or installation.

• The stainless-steel shell can help prevent new damage or cover an already damaged skeg on compatible lower units.
• A thickened 3 mm wear plate adds strength where contact with ramps, rocks, and debris is most likely.
• An integrated drain hole helps reduce stagnant water that can contribute to corrosion or freezing.
• Self-locking hardware supports a straightforward do-it-yourself installation without welding.
• The formed guard follows the skeg closely to minimize unnecessary drag or performance compromise.

Compare with our other skeg guards.