Jabsco Brass Engine Oil Changer Drain Pump

The Jabsco brass engine oil changer drain pump gives a manual way to remove engine oil through the dipstick-tube connection on many compatible marine engines. The polished brass hand pump attaches to a threaded 3/4-inch garden-hose-style fitting at the top of supported dipstick tubes, allowing used oil to be transferred without removing a conventional drain plug in a cramped bilge.

One-hand pumping simplifies oil changes where engine access is limited, and the included 2-foot length of 1/2-inch inside-diameter drain hose directs the extracted oil into a suitable waste container. The manual design does not require an electrical connection and can be stored aboard as a dedicated service tool.

Confirm that the engine’s dipstick tube has the required threaded fitting before use. Warm the engine only as recommended for oil service, shut it down safely, contain all waste oil, and prevent spills into the bilge or water. Dispose of used oil through an approved recycling or collection facility.

• The pump avoids reaching a difficult engine drain plug.
• Manual one-hand pumping makes the tool usable anywhere aboard.
• The pump screws directly onto supported marine-engine dipstick tubes.
• A 2-foot drain hose helps transfer used oil into a collection container.

Compare with our other engine controls & ignition.