Black Oak 20 in White Single Row Combo LED Light Bar

The Black Oak 20 in White Single Row Combo LED Light Bar uses a slim one-row housing to provide a mix of long-range spot lighting and wider flood coverage. Black Oak positions this marine-series bar for boats as well as trucks, Jeeps, UTVs, and other vehicles that benefit from a lower-profile light. The supplier lists beam reach of more than 1,100 m, while the flood portion of the optic helps reveal obstacles outside the narrow centerline of the beam. The white powder-coated housing makes the bar a natural visual match for many center consoles, T-tops, fiberglass structures, and light-colored vehicle installations.

Protection starts with Black Oak’s 360-degree ceramic treatment for ultraviolet exposure, salt water, and corrosion. A two-stage Hydrex seal system supports full submersion capability, and the Dynamax housing is built as a reinforced frame for rough use. The combination spot/flood optic is paired with 9-gauge marine-grade stainless steel multi-mount brackets. Those construction details are intended to help the light survive the vibration, spray, sun, and weather that come with marine and off-road installations.

This 20 in model is rated at 100W, draws 6.7A, and uses 20 LEDs. Black Oak lists 13,200 raw lumens, a product weight of about 6.4 lb, and an IP69K ingress rating. Width with the mounting bracket is approximately 22 in, with the single-row housing remaining about 2.6 in high at the bracket. The light is covered by Black Oak’s lifetime warranty.

Suggested uses include center-console and T-top lighting, bumper or grille mounting, trail and dune lighting, and illuminating water around smaller boats. The package includes the light bar, a complete harness with fuse, relay, and switch, mounting brackets, and the hardware required for a standard installation. Because the beam combines distance and spread, final mounting angle can be adjusted to balance forward reach with useful near-field coverage. The supplied electrical components reduce the amount of additional wiring hardware that has to be sourced separately.

• Single-row profile with combination spot/flood optics
• 9-gauge marine-grade stainless steel multi-mount brackets
• Ceramic protection against UV exposure, salt water, and corrosion
• Fully submersible Hydrex seal system
• Complete fused harness, relay, switch, brackets, and hardware included

For additional marine and auxiliary LED light bars, browse more LED Light Bars & Pods.