BEP Marine Pro Installer 750A ANL Fuse Holder

The BEP Marine Pro Installer ANL fuse holder is built for high-capacity DC systems where inverters, chargers, and other power electronics need fast overcurrent protection. It accepts ANL fuses and adds two extra connection studs so high-current cable routing can be handled at the same protection point. That arrangement can reduce the number of separate distribution components required in a battery compartment. The holder is intended to protect both connected equipment and the heavy conductors feeding it from damaging short-circuit current.

Radiused ends give large battery cables a smoother path into the terminals, which helps reduce awkward bends and crowded lug stacks. The construction is designed to let the installed fuse carry its intended load without the holder becoming the weak point in the circuit. ANL fuses with either 5/16 in or 3/8 in mounting dimensions can be accommodated as specified by the manufacturer. This makes the holder useful in both new high-current installations and upgrades to existing battery and inverter wiring. The ANL format is specified for fault interruption up to 6,000 amps.

• Two additional studs provide extra cable-termination options
• Radiused ends improve heavy-cable routing
• Designed for inverter, charger, and high-current DC protection
• Accepts common ANL fuse mounting sizes

Mount the fuse holder close to the protected power source and keep the cable path as short and mechanically supported as practical. Select the actual fuse rating from the conductor and equipment requirements rather than simply matching the maximum capacity of the holder. For compatible replacement parts and related equipment, browse more Bus Bars & Power Distribution.