Attwood 1.5 in Stainless Gasoline Deck Fill

The Attwood gasoline deck fill provides a durable stainless entry point for the boat fuel-fill hose. The cap is clearly identified for gasoline and uses red color coding to reduce the chance of filling the wrong onboard system. An O-ring seals the flush cap against water intrusion, while a stainless beaded chain keeps the cap attached when it is removed. The extended neck is intended to accommodate thicker deck laminates than a short-body fill.

The polished exterior gives the exposed fitting a clean finished appearance and complements other stainless deck hardware. A slotted cap requires a separate key, adding a measure of control over access to the fuel fill. The fitting is intended for conventional gasoline systems rather than EPA-certified pressure-relief systems. Installation also requires a bonding conductor to reduce the risk of static sparking during refueling, as specified by marine fuel-system standards. The fill neck is 3-1/4 in long, the installation opening is 1-7/8 in, and the flange measures 3 in across. The slotted cap uses a separate key that is sold separately, and a beaded retaining chain keeps the cap attached to the fitting. A bonding wire is required to reduce spark risk during fueling in accordance with the cited U.S. Coast Guard and ABYC H-24 guidance.

• Gasoline identification and red color coding reduce refueling errors
• Stainless chain keeps the cap attached to the fitting
• Long neck accommodates thicker deck laminates
• Bonding connection is required for proper gasoline installation

Bond the fitting and route the fill hose according to USCG and ABYC fuel-system requirements before the boat is put back in service. Inspect the O-ring, chain, and hose clamps periodically because the deck fill is exposed to both weather and repeated refueling use. For compatible replacement parts and related equipment, browse more Fuel System Components.