Uflex 28-Foot Two-Hose Hydraulic Hose Kit

For hydraulic steering installations that need a 28-foot hose run, the Uflex two-hose kit provides two matching high-pressure lines with factory-preassembled fittings. The pair is intended to carry steering fluid between compatible helm and cylinder components without requiring on-board hose termination.

Each line arrives with fittings already secured to both ends, simplifying the pressure-side plumbing compared with cutting and crimping loose hose. The matched pair should be routed together with enough allowance for bends, service loops, and full steering movement.

Verify that the 28-foot length matches the actual route and confirm the fitting type, helm, cylinder, and pressure requirements before installation. Protect the hoses from sharp edges, heat, and moving parts. Once connected, the hydraulic steering circuit must be filled, bled, and checked carefully for leaks.

• Two 28-foot hoses supplied as a matched kit
• Factory-preassembled end fittings
• Flexible high-pressure steering lines
• Requires correct bleeding and leak inspection after installation

Compare with other hydraulic hoses & fittings.