Trident 1-1/8-Inch 50-Foot White Sanitation Hose

When a marine waste line needs a 1-1/8-inch inside diameter, this Trident extra-heavy-duty sanitation hose provides an odor-resistant white vinyl option. The smooth inner wall and hard PVC reinforcing helix are made for routes that need both secure clamping and flexibility. Its 50-foot boxed length accommodates longer replacements and multiple short sections. The formulation is intended to limit the odor permeation associated with conventional tubing.

Trident recommends self-draining installations so waste does not remain in low areas of the line. The hose can also be used for selected potable-water fill, drain, scupper, bilge, and livewell applications where the service requirements match. Its stated operating range is 10°F to 140°F, and the manufacturer says separate cuffs are unnecessary. Keep alcohols, antifreeze, petrochemicals, and solvent products out of this hose because the formulation is not intended for them.

A correct inside diameter is essential for sealing sanitation fittings without forcing the hose onto the wrong barb. Pay attention to the full routing path and any sections that could trap standing waste. For other waste-line parts, see our sanitation hose and plumbing selection.

• Formulated to resist waste-line odor transfer
• Smooth white vinyl reinforced by hard PVC helix
• Helps accommodate curved sanitation hose routes
• No separate molded cuffs required