Trident 1-1/4-Inch 50-Foot Clear Livewell Hose

For a larger water-discharge connection, the Trident clear livewell hose offers a 1-1/4-inch inside diameter in a flexible corrugated design. It is suitable for selected bilge, livewell, scupper, and drain circuits on recreational boats. The black PVC helix supports the transparent vinyl wall while allowing the hose to follow a curved route.

A smooth inner tube reduces the interruption that could otherwise come from an exposed corrugated passage. The manufacturer specifies operating temperatures from 10°F to 140°F. Separate molded cuffs are not necessary at the ends for the intended clamping arrangement. This hose should not be used with below-waterline through-hull connections, even if the inside diameter matches.

This 50-foot boxed supply can be cut to fit an existing plumbing run. The larger diameter makes it important to check clearance near bulkheads and tank compartments before cutting the hose. Use the fitting and clamp dimensions required by the equipment rather than substituting a smaller discharge line. Explore other diameters and wall designs in our marine water and bilge hose selection.

• Clear flexible vinyl with a black reinforcing helix
• Smooth tube for livewell and bilge discharge
• Bendable construction fits complex plumbing runs
• Intended for above-waterline hose connections