SeaDek 40 x 80 in Cool Grey/Black Brushed Deck Sheet

Custom-cut flooring is easier to plan with a full-size SeaDek sheet in Cool Grey and Black. At 6mm thick, it adds a comfortable foam layer over suitable boat surfaces. Its brushed finish is intended for slip-resistant marine use rather than smooth decorative covering. Lay out the larger sections first so the smaller cuts can be made from the remaining material.

The 40 x 80 in size is useful for custom-fitting a continuous section or dividing the material into smaller pads. Areas such as seating surfaces and cooler lids may benefit from the same brushed finish used on the deck. Accurately mark the intended shapes before trimming to reduce wasted material. Measure curved sections carefully before transferring those outlines to the sheet.

Each panel has factory-applied pressure-sensitive adhesive for direct mounting to suitable, prepared surfaces. Dry positioning is recommended before the liner is removed, particularly when the pattern must run in one direction. Carefully press the installed material into place rather than repeatedly lifting and repositioning it.

Key Features:

• 40 x 80 in full sheet with 6mm thickness
• Two-tone brushed finish for a distinctive deck appearance
• Brushed, non-skid surface for marine applications
• Cut-to-fit sheet for custom layouts
• Factory-applied pressure-sensitive adhesive backing

Browse more boat outfitting accessories.