SeaDek 40 x 80 in Mocha/Black Teak Deck Sheet

Custom-cut flooring is easier to plan with a full-size SeaDek sheet in Mocha and Black. At 6mm thick, it adds a comfortable foam layer over suitable boat surfaces. Its brushed finish is intended for slip-resistant marine use rather than smooth decorative covering. This is raw cut-to-fit flooring material, so the installer determines the exact outline of each finished piece.

The 40 x 80 in size is useful for custom-fitting a continuous section or dividing the material into smaller pads. Areas such as seating surfaces and cooler lids may benefit from the same brushed finish used on the deck. Accurately mark the intended shapes before trimming to reduce wasted material. Plan the cut edges around fittings so the installed sheet does not interfere with their operation.

Each panel has factory-applied pressure-sensitive adhesive for direct mounting to suitable, prepared surfaces. Dry positioning is recommended before the liner is removed, particularly when the pattern must run in one direction. Carefully press the installed material into place rather than repeatedly lifting and repositioning it.

Key Features:

• 40 x 80 in full sheet with 6mm thickness
• Teak pattern with 2.5 in line spacing for a distinctive deck appearance
• Brushed, non-skid surface for marine applications
• Cut-to-fit sheet for custom layouts
• Designed for custom boat deck flooring

Browse more boat outfitting accessories.