Jabsco 44411 Chrome 45-PSI Flush Mount Regulator

The Jabsco 44411 Flush Mount Regulator in chrome (part 44411-2045) is a city water inlet that brings dock pressure down to a steady 45 psi before it reaches the boat's plumbing. Marina water lines can run as high as 125 psi, which is enough to split a fitting or burst a hose behind a cabinet while you are away. This unit holds its set pressure whether one tap is open or several.

A built-in check valve stops boat water from flowing back into the dock supply, and it also keeps tank water from escaping out the inlet when the hose is disconnected. A removable screen catches pipe scale and grit before it can reach valve seats and pump check valves. When you are not hooked up, the attached cap keeps dirt and insects out of the inlet.

The polished chrome face suits boats with stainless or chrome deck hardware around the inlet area. It mounts flush in the hull side or a locker face and replaces most original city water inlets without enlarging the hole much, if at all. Pull and rinse the screen each spring, especially at marinas with older water lines. The white version and other inlet parts are in our marine toilets and sanitation systems.

• Chrome finish, part 44411-2045
• Reduces up to 125 psi down to 45 psi
• Check valve and removable screen
• Flush mount with dust cap