Flojet RV Macerator Pump adds flexibility to holding tank service, letting you empty black and grey water tanks at a dump station, down a toilet, into a house sewer clean-out, septic tank, or mobile waste wagon. It is designed for RV and boat owners who want to replace a dirty 3-inch sewer hose with a cleaner, easier-to-handle garden hose.
This macerator empties a typical 30-gallon holding tank in under 3 minutes, grinding waste and tissue with a stainless steel cutter down to 1/8-inch particles at flow rates up to 13 GPM. Self-priming design allows mounting up to 4 feet above the tank liquid level, and a built-in Impeller Protection Device shuts off the pump after 20 seconds of run-dry operation for longer motor life. Browse more options in our mounting and rigging hardware category.
Key Features: Up to 13 GPM flow rate, grinds waste to 1/8" particles, self-priming up to 4 ft above tank, 3" ID intake/1" ID discharge, Impeller Protection Device, USCG Regulation 183.410 and ISO 8846 MARINE compliant, 3.5 lbs.
Frequently Asked Questions
How fast does this pump waste? Up to 13 GPM, emptying a typical 30-gallon tank in under 3 minutes.
How high above the tank can this be mounted? Up to 4 feet, thanks to its self-priming design.
What happens if the pump runs dry? The built-in Impeller Protection Device shuts off the pump after 20 seconds to prevent damage.
Flojet RV Macerator Pump adds flexibility to holding tank service, letting you empty black and grey water tanks at a dump station, down a toilet, into a house sewer clean-out, septic tank, or mobile waste wagon. It is designed for RV and boat owners who want to replace a dirty 3-inch sewer hose with a cleaner, easier-to-handle garden hose.
This macerator empties a typical 30-gallon holding tank in under 3 minutes, grinding waste and tissue with a stainless steel cutter down to 1/8-inch particles at flow rates up to 13 GPM. Self-priming design allows mounting up to 4 feet above the tank liquid level, and a built-in Impeller Protection Device shuts off the pump after 20 seconds of run-dry operation for longer motor life. Browse more options in our mounting and rigging hardware category.
Key Features: Up to 13 GPM flow rate, grinds waste to 1/8" particles, self-priming up to 4 ft above tank, 3" ID intake/1" ID discharge, Impeller Protection Device, USCG Regulation 183.410 and ISO 8846 MARINE compliant, 3.5 lbs.
Frequently Asked Questions
How fast does this pump waste? Up to 13 GPM, emptying a typical 30-gallon tank in under 3 minutes.
How high above the tank can this be mounted? Up to 4 feet, thanks to its self-priming design.
What happens if the pump runs dry? The built-in Impeller Protection Device shuts off the pump after 20 seconds to prevent damage.
Be the first to write a review.
