Connect-Ease Graph Power Tiller Kit 10 Gauge

This Connect-Ease Graph Power Tiller is designed for powering today's locators, graphs, and networking equipment directly off the battery, sized around 10 feet of 10-gauge marine grade wire. Nylon sheathing protects that wire and helps limit RF interference, a real concern when sensitive electronics like a graph or GPS share power with other onboard systems. That interference reduction can mean the difference between a clean display and one plagued by noise.

Three fused connections let power reach graphs, pucks, GPS units, and NMEA boxes directly from the battery, giving each device the clean, dedicated power it needs for the best performance. Wiring electronics straight to the battery this way avoids daisy-chaining off another circuit. It also meets the recommendations most electronics manufacturers actually make for their gear.

A 30-amp fuse protects the connection at the battery end, with matching fusing at the device end as well, so the whole run is protected rather than just one side of it. That dual fusing is a meaningful safety detail on a kit that's ultimately routing real current straight from the battery to sensitive electronics. A single point of protection would leave the other end of the run exposed to a fault. See what else we carry in marine networking.

• 10ft of 10-gauge marine grade wire
• Nylon sheathing limits RF interference
• 3 fused connections for graphs, GPS, NMEA boxes
• 30-amp fused at both battery and device end