Barton Marine 165mm 25mm T-Track Sliding Cleat

The Barton Marine 165mm 25mm T-Track Sliding Cleat adds a movable spring-line cleat to a compatible genoa T-track without requiring access beneath the side deck. The cleat slides onto the track after an end stop is removed and can then be locked where it is most useful for docking. When the boat is underway, it can be moved to the end of the track or removed completely to reduce deck clutter and snag points. The arrangement is useful on boats where drilling and backing a permanent midship cleat would be difficult.

A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - is simply to remove a Genoa track end stop, slide on the cleat and lock it in the desired position. Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required and removed when not in use - reducing deck clutter and rope snags. Slides onto compatible T-track without under-deck access. Can be repositioned along the rail for docking.

• Slides onto compatible T-track without under-deck access
• Can be repositioned along the rail for docking
• Removable design helps reduce deck clutter underway

For the 165mm 25mm T-Track Sliding Cleat, confirm the boat uses the compatible T-track width before removing the end stop and sliding the cleat onto the rail. The cleat can be left at a convenient track position for docking or removed after use when a clear side deck is preferred. For more cleating, track, and sail-control hardware, browse more Sailing Hardware.