Albin Group Automatic 1100 GPH 24V Bilge Pump

The Albin Group Automatic 1100 GPH Bilge Pump is a 24 volt submersible pump with a built-in electronic level switch. It turns on by itself when water rises, with no separate float switch needed. Albin rates it for pleasure boats from 25 to 30 feet.

Flow is 1100 GPH, or 1000 GPH at 1 meter of head. A three-wire design allows automatic, manual or override operation. The pump has a stainless steel shaft, a tough thermoplastic ABS housing and low power consumption.

The base plate is removable with an integrated strainer, which makes maintenance easy. The straight discharge port is 1.15 inches (29 mm), the pump uses a 2.5 amp fuse, and it measures 6 x 3.75 x 3 inches. Check the available mounting space and hose routing before installation so the ports can be connected without sharp bends. Browse more bilge pumps.

• Built-in electronic level switch for automatic operation
• Three-wire design for automatic, manual or override modes
• Removable base with integrated strainer
• 24 volt system for boats 25 to 30 feet
• For pleasure boats from 8m (25 Ft) to 10m (30 Ft) length