Airmar Furuno 10-Pin 600W Mix & Match Cable

The Airmar Furuno 10-pin Mix & Match cable is the adapter half of Airmar's two-part transducer system, connecting a 600W non-CHIRP transducer to Furuno equipment. Mix and Match transducers ship with a short 2 metre pigtail ending in an Airmar 5-pin male connector, and nothing else. This 8 metre cable has the matching 5-pin female connector at one end and a Furuno 10-pin at the other.

You need both pieces for a working installation, which catches people out when they order only the transducer. The reason for the split is worth understanding before you buy. If you change electronics brands later, the transducer stays in the hull and you swap this cable for the version matching the new brand, rather than pulling a through-hull. One limitation: 600W Mix and Match cables do not work with 1kW or CHIRP transducers. Explore more fish finder accessories.

• The short pigtail attached to the transducer ends in an Airmar 5-pin male connector
• Both parts are needed for installation
• If the user changes equipment brand later, the transducer can be left in place and the adapter cable replaced