Lumitec Caprera3 White/Blue Dimming Spreader Light
- UPC:
- 089300017116
- MPN:
- 101711
- Condition:
- New
- Availability:
- In Stock
- Shipping:
- $5.95 Flat Rate (Per Order)
Description
Now with 1,200 lumens, the Lumitec Caprera3 Spreader Light is built in a smaller, more thermally efficient powder-coated die-cast aluminum housing with an improved optical beam pattern for a more even flood spread. This White/Blue Dimming version in white housing pairs a standard white work light with a dimmable blue mode for preserving night vision at the helm, putting out 20% more light than the previous Capri/Caprera line while drawing less power.
The Caprera3 does away with exposed fasteners entirely, using an innovative butterfly clip mounting system that holds the light in place with a spring clip instead of screws, giving your hardtop a clean, flush finish. It's IP67 rated for dependable performance in wet marine conditions and PLI enabled, making it compatible with Lumitec's Poco Digital Lighting Control system on most models for advanced dimming and lighting control. If you're upgrading from an older Capri light, a retrofit kit is available that drops into the existing mounting recess without requiring new screw holes. Browse more in our marine lighting category.
Key Features: 1,200+ TRUE measured lumens, White/Blue dimming output, powder-coated die-cast aluminum housing, butterfly clip mounting with no exposed fasteners, IP67 rated, PLI enabled for Poco Digital Lighting Control compatibility, 5000 CCT, 70+ CRI, flood beam pattern.
Frequently Asked Questions
What makes the Caprera3 different from the previous Capri/Caprera line? It's smaller and more thermally efficient, and puts out 20% more light (1,200+ lumens) while drawing less power, with a more optically efficient beam pattern for a consistent, even light spread.
Does this light require screws to install? No, the Caprera3 uses a butterfly clip easy-fit mounting system that holds the light in place with a spring clip, so there are no exposed fasteners.
Is this light compatible with Lumitec's Poco lighting control system? Yes, the Caprera3 is PLI enabled, making it compatible with most models of Lumitec's Poco Digital Lighting Control system for advanced dimming and lighting control via a compatible MFD or smart device.
Specifications
- Type:
- Spreader Light
- Brand:
- Lumitec
- Model:
- 101711
- Color Output:
- White/Blue Dimming
- Finish/Housing:
- White
- Lumens:
- 1,200+ TRUE measured
- Voltage:
- 10-30 VDC
- 12v DC Amps:
- 1A
- 24v DC Amps:
- 0.5A
- CCT:
- 5000
- CRI:
- 70+
- Beam Pattern:
- Flood
- IP Rating:
- 67
- PLI Enabled:
- Yes
- Mounting:
- Butterfly Clip
- Weight:
- 6.40 oz
Description
Now with 1,200 lumens, the Lumitec Caprera3 Spreader Light is built in a smaller, more thermally efficient powder-coated die-cast aluminum housing with an improved optical beam pattern for a more even flood spread. This White/Blue Dimming version in white housing pairs a standard white work light with a dimmable blue mode for preserving night vision at the helm, putting out 20% more light than the previous Capri/Caprera line while drawing less power.
The Caprera3 does away with exposed fasteners entirely, using an innovative butterfly clip mounting system that holds the light in place with a spring clip instead of screws, giving your hardtop a clean, flush finish. It's IP67 rated for dependable performance in wet marine conditions and PLI enabled, making it compatible with Lumitec's Poco Digital Lighting Control system on most models for advanced dimming and lighting control. If you're upgrading from an older Capri light, a retrofit kit is available that drops into the existing mounting recess without requiring new screw holes. Browse more in our marine lighting category.
Key Features: 1,200+ TRUE measured lumens, White/Blue dimming output, powder-coated die-cast aluminum housing, butterfly clip mounting with no exposed fasteners, IP67 rated, PLI enabled for Poco Digital Lighting Control compatibility, 5000 CCT, 70+ CRI, flood beam pattern.
Frequently Asked Questions
What makes the Caprera3 different from the previous Capri/Caprera line? It's smaller and more thermally efficient, and puts out 20% more light (1,200+ lumens) while drawing less power, with a more optically efficient beam pattern for a consistent, even light spread.
Does this light require screws to install? No, the Caprera3 uses a butterfly clip easy-fit mounting system that holds the light in place with a spring clip, so there are no exposed fasteners.
Is this light compatible with Lumitec's Poco lighting control system? Yes, the Caprera3 is PLI enabled, making it compatible with most models of Lumitec's Poco Digital Lighting Control system for advanced dimming and lighting control via a compatible MFD or smart device.
Specifications
- Type:
- Spreader Light
- Brand:
- Lumitec
- Model:
- 101711
- Color Output:
- White/Blue Dimming
- Finish/Housing:
- White
- Lumens:
- 1,200+ TRUE measured
- Voltage:
- 10-30 VDC
- 12v DC Amps:
- 1A
- 24v DC Amps:
- 0.5A
- CCT:
- 5000
- CRI:
- 70+
- Beam Pattern:
- Flood
- IP Rating:
- 67
- PLI Enabled:
- Yes
- Mounting:
- Butterfly Clip
- Weight:
- 6.40 oz
Specifications
Type, Brand, Model, Color Output, Finish/Housing, Lumens, Voltage, 12v DC Amps, 24v DC Amps, CCT,
Specifications
- Type:
- Spreader Light
- Brand:
- Lumitec
- Model:
- 101711
- Color Output:
- White/Blue Dimming
- Finish/Housing:
- White
- Lumens:
- 1,200+ TRUE measured
- Voltage:
- 10-30 VDC
- 12v DC Amps:
- 1A
- 24v DC Amps:
- 0.5A
- CCT:
- 5000
- CRI:
- 70+
- Beam Pattern:
- Flood
- IP Rating:
- 67
- PLI Enabled:
- Yes
- Mounting:
- Butterfly Clip
- Weight:
- 6.40 oz
Our customers love it
Review this ProductBe the first to write a review.