Black Oak 2 in White Flush Marine Spreader Light

The Black Oak 2 in White Flush Marine Spreader Light is made for low-profile mounting on fiberglass T-tops, gunwales, and other boat surfaces where a projecting bracket light would be intrusive. Two 10W Cree LEDs send light through a 90-degree pattern that is well suited to foredeck, aft-deck, cockpit, and general area illumination. The flush format keeps the fixture close to the mounting surface and gives the installation a cleaner finished appearance. It can also be used for game-fishing, accent, and wake-area lighting where broad nearby coverage is more important than long-range reach.

Black Oak applies DuPont powder coat to help the housing handle repeated sun and salt exposure. The fixture also receives 360-degree ceramic protection and the company’s two-stage Hydrex sealing system, while the Dynamax housing is built as a reinforced frame. Those construction details are intended for exposed marine locations that regularly see spray, washdown water, vibration, and ultraviolet light. The white finish blends naturally with many fiberglass and powder-coated marine structures.

The light is rated at 20W, draws 1.4A, uses two LEDs, and weighs about 0.7 lb. Overall dimensions are approximately 4-1/4 in long by 2-3/8 in high by 2-1/2 in deep, with the mounting holes spaced about 3-1/2 in apart horizontally. Black Oak backs the fixture with a lifetime warranty. The listed dimensions provide a useful reference for checking cutout depth and mounting clearance before drilling.

The package includes the marine spreader light, a wiring pigtail, and a stainless steel mounting kit. Because the light mounts flush, the installation area should be checked for rear clearance before drilling. Mounting angle and location should also be chosen to keep the 90-degree beam on the deck or work area instead of reflecting directly back toward the operator. The supplied stainless hardware helps complete the marine installation without substituting ordinary plated fasteners.

• 90-degree spreader pattern for broad deck illumination
• Two 10W Cree LEDs
• DuPont powder-coated marine housing
• Wiring pigtail and stainless steel mounting kit included
• Spreader light

For more deck, spreader, and flood-lighting choices, browse more Deck, Spreader & Flood Lights.